NEWS

There are several main reasons for the overload operation damage of the pneumatic actuator

A key problem of pneumatic actuator damage is load. Its load situation mainly has the following types:1, the torque constraint organization of the se

It is very important to select the actuator correctly. If the actuator is too large, the stem may be stressed too much. Conversely, if the actuator i

With 5 features of the compressed air filter(1) The primary filtration power is higher, generally should be able to reach more than 99.99%; Small res

The coil shell of the explosion-proof solenoid valve not only has the flameproof effect of accepting the gas explosion pressure, but also has the blo

The travel switch is mainly used to convert the displacement of mechanical equipment into electronic signals, so that the working condition of the mo

Limit switches and proximity switches are two types of positioning switches commonly used in the equipment industry, and there are different choices

Atmospheric air is naturally polluted. These include water vapor, oil vapor, liquid oil, liquid water, pipe stains/rust, water aerosols, natural gas

What are the types of solenoid valves?1) Structural method of gate valve: rising rod wedge elastic gate—0, rising rod wedge rigid single gate—1, risi

Pneumatic actuators occupy a very important position in the field of industrial production. Pneumatic actuators mostly work in harsh environments, su

Now there are more and more pneumatic valve actuator control methods and techniques. In actual industrial life and industrial control, the methods us

Nowadays, the skill of liquid level measurement is the fundamental skill of process control management in chemical, chemical, environmental and relat

Solenoid valve has electromagnetic coil and magnetic core of these two parts, including one or more holes in the valve body. When the coil in the sol

Compressed air filter is the use of physical method to filter compressed air, filter out solid particles, water droplets, oil mist and other impuriti

When installing the valve, in order to prevent metal, sand and some other foreign matter from entering the valve and damaging the sealing surface of

1. If the corrosion-resistant solenoid valve connector is loose or the wire connector is off, the solenoid valve cannot be powered. Tighten the wire