1, can add a storage tank next to the pneumatic actuator, the gas source should first enter the storage tank, and then into the actuator, about the type of relatively large valve may need more gas with this method is better. The function of the storage tank is not to increase the pressure of the imported gas source, but to stabilize the origin of the pressure. The principle of this method is that the imported pipeline is small, and then the supply of the gas source can not keep up, resulting in the pressure drop. It is generally possible to provide emergency air supply to important valves in this way.

2. If the switch is required to be fast, it can take the gas through the pipeline to be thicker, so that the gas intake will increase, and the switch will naturally be fast

3. Get an accelerator.

4. In fact, when the valve is equipped with the pneumatic actuator, the switching time requirement of the valve should be considered. Under the premise of considering safety, if the intake and exhaust speed of the pneumatic actuator is considered, the larger diameter of the pipe can be selected in the selection of the pipe.

5, can also add exhaust valve, improve the switching speed of pneumatic valve.